| Home Prev |  NetWall E10 Getting Started Guide
|
Next |
|---|
The NetWall E10 can be mounted on any appropriate stable, flat, level surface that can safely support the weight of the appliance and its attached cables.
However, the E10 can also be wall mounted by sliding the two brackets on the underside of the unit onto suitably located mounting screws.
![[Note]](images/note.png) |
Note: Attach the rubber feet provided with the E10 |
|---|---|
|
Adhesive rubber feet for the E10 unit are provided with the E10 in its packaging. These should be attached at the corners of the E10's underside for resting on a flat surface. This protects both the surface and the appliance from damage as well as allowing air to circulate underneath for improved cooling during operation. |
![[Important]](images/important.png) |
Important: Always leave space around the appliance |
|---|---|
|
Always ensure there is adequate space around the appliance for ventilation and for easy access to switches and cable connectors. No objects should be placed on top of the casing. |
Once the brackets are firmly attached on either side, the unit can be mounted in a rack. Rear support is not required.
