| Home Prev |  NetWall 200R Series Getting Started Guide
|
|---|
Dimensions and Weight
| Height x Width x Depth (mm) | 150 mm (5.9") (H) x 66 mm (2.6") (W) x 127 mm (5") (D) |
| Hardware Unit Weight | 1.5 kg |
| Packaged Weight | 1.8 kg |
| Hardware Form Factor | DIN Rail Mountable |
| 19-inch Rack Mountable | No |
| MTBF | 164,580 Hours / 40° C |
Regulatory and Safety Standards
| Safety | CE (Class A), FCC (Class A) |
| EMC | CE (Class A), FCC (Class A) |
Environmental
| Operating and Storage Humidity | 10% to 95% |
| Operating Temperature | -40°C to 70°C (-40°F to +158°F) |
| Vibration/shock |
10 ~ 500 Hz, 2G 10min/1 cycle, period for 60min, each along X, Y, Z |
Power Specifications
| Rated Power Supply Input | 9 to 36V DC (typical 12/24V) with terminal block for dual power input
OVP, UVP, OCP, RPP power protection design |
| PSU Rated Power (AC Input) | 230 AC |
| Typical Current | @ 24v DC 0.7A |
| Power consumption (max) | 20w |
| Power consumption (typical) | 17w |
| British Thermal Unit (BTU) | 58 (typical) |
Ethernet Interface Support
| Gigabit RJ45 interfaces |
Automatic MDI-X 2.5GBASE-T 1000BASE-T (copper RJ45 100m) 100BASE-TX (copper RJ45 100m) 10BASE-T (copper RJ45 100m) |
| SFP interfaces | 1000BASE-SX (multi-mode 550m) 1000BASE-LX (single-mode 20km) 1000BASE-LX/EX (single-mode 40km) 1000BASE-ZX (single-mode 80km) 1000BASE-T (copper RJ45 100m) Note that only Clavister supplied SFP modules have been tested to function correctly with the 200R Series. |
| LAN Bypass | Yes (RJ45) |
For more information about Clavister products, go to: https://www.clavister.com
