1.3. Status Lights

Home Prev	NetWall 100 Series Getting Started Guide	Next

The NetWall 100 Series features a set of status lights on the opposite side to the Ethernet ports.

Figure 1.4. NetWall 100 Series Status Panel View

These LEDs indicate the overall system status, as well as the status of the Ethernet interfaces.

The two status LEDs on the left side indicate overall 100 Series status:

Upper Green LED - This shows power is supplied to the unit.
Lower Blue LED - cOS Core has started and is running.

The three rows of twin LEDs marked WAN1, WAN2, LAN1 and LAN2 mirror the status lights located on the sides of the RJ45 interface ports and indicate the following states:

Upper LED:
1. Solid Green - The interface has power.
2. Flashing Green - The interface is active.
Lower LED:
1. Green - 100 Mbit link.
2. Yellow - 1000 Mbit link.
3. Dark - 10 Mbit link or no link.