| Home Prev |  NetShield 6000 Series Getting Started Guide
|
Next |
|---|
Dimensions, Weight and MTBF
| Height x Width x Depth (mm) | 44 x 438 x 508 |
| Hardware Unit Weight | 7.5 kg (no expansion modules, single PSU) |
| Hardware Form Factor | 1U |
| 19-inch Rack Mountable | Yes, using rack mount kit |
| MTBF | 165,648 hours @ 20° C |
Regulatory and Safety Standards
| Safety | UL, CB, TUV |
| EMC | FCC, CE, VCCI |
Environmental
| Operating and Storage Humidity | 0% to 95% (non-condensing) |
| Operating Temperature | 0 to 40° C |
Power Specifications
| Redundant Hot-Swappable Power Supply (AC) | 100-240 VAC, 50-60 Hz |
| PSU Rated Power (AC Input) | 300W (100VAC/≤5A - 240VAC/≤2.5A) |
| PSU Rated Power (DC) | 300W (-36VDC/≤11A - -72VDC/≤6A) |
| Maximum Power Consumption | 140.3W |
| Typical Current | 0.48A @AC input (0.6A at load) |
| BTU | 460 BTU (at load) |
Ethernet Interface Support
| Gigabit RJ45 interfaces |
Automatic MDI-X 1000BASE-T (copper RJ45 100m) 100BASE-TX (copper RJ45 100m) 10BASE-T (copper RJ45 100m) |
| SFP interfaces (if expansion module installed) | 1000BASE-SX (multi-mode 550m) 1000BASE-LX (single-mode 10,40,80km) 1000BASE-T (copper RJ45 100m) |
| SFP+ interfaces (including any expansion module) |
10GBASE-SR (multi-mode 300m) 10GBASE-LR (single-mode 10km) 10GBASE-ER (single-mode 40km) 10GBASE-ZR (single-mode 80km) 10GBASE-CR (direct attach) Note that only Clavister supplied SFP+ modules have been tested to function correctly with the 6000 Series. |
For more information about Clavister products, go to: https://www.clavister.com
