| Home Prev |  Virtual cOS Stream 3.90.00 Getting Started Guide
|
Next |
|---|
If a physical Ethernet adapter from Mellanox® Technologies is being used with a virtualized Clavister Firewall, then it should be noted that only the following adapter models with the stated firmware versions are supported:
ConnectX®-3 Pro
| Part No. | Speed | Ports | Firmware |
|---|---|---|---|
| MCX354A-FCC_Ax | 40GbE | 2 | 2.40.5030 |
ConnectX®-4
| Part No. | Speed | Ports | Firmware |
|---|---|---|---|
| MCX4111A-XCAT | 10GbE | 1 | 12.18.1000 |
| MCX4121A-XCAT | 10GbE | 2 | 12.18.1000 |
| MCX4111A-ACAT | 25GbE | 1 | 12.18.1000 |
| MCX4121A-ACAT | 25GbE | 2 | 12.18.1000 |
| MCX4131A-BCAT | 40GbE | 1 | 12.18.1000 |
| MCX413A-BCAT | 40GbE | 1 | 12.18.1000 |
| MCX415A-BCAT | 40GbE | 1 | 12.18.1000 |
| MCX4131A-GCAT | 50GbE | 1 | 12.18.1000 |
| MCX413A-GCAT | 50GbE | 1 | 12.18.1000 |
| MCX414A-BCAT | 50GbE | 2 | 12.18.1000 |
| MCX415A-GCAT | 50GbE | 2 | 12.18.1000 |
| MCX416A-BCAT | 50GbE | 2 | 12.18.1000 |
| MCX416A-GCAT | 50GbE | 2 | 12.18.1000 |
| MCX415A-CCAT | 100GbE | 1 | 12.18.1000 |
| MCX416A-CCAT | 100GbE | 2 | 12.18.1000 |
ConnectX®-4 Lx
| Part No. | Speed | Ports | Firmware |
|---|---|---|---|
| MCX4121A-XCAT | 10GbE | 2 | 14.18.1000 |
| MCX4121A-ACAT | 25GbE | 2 | 14.18.1000 |
ConnectX®-5
| Part No. | Speed | Ports | Firmware |
|---|---|---|---|
| MCX556A-ECAT | 100GbE | 2 | 16.18.1000 |
ConnectX®-5 Ex EN
| Part No. | Speed | Ports | Firmware |
|---|---|---|---|
| MCX516A-CDAT | 100GbE | 2 | 16.18.1000 |
![[Important]](images/important.png) |
Important: Firmware versions must be correct |
|---|---|
|
Note that it is important that each device has the correct firmware version installed. |
