These log messages refer to the TIMESYNC category.
2.52.1. [ID: 772] An internal error has occurred
- Log Categories
- TIMESYNC
- Log Message
- An internal error has occurred.
- Default Log Severity
- Alert
- Parameters
- value
- Explanation
- An internal error has occurred and the NTP daemon will be restarted.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.52.2. [ID: 634] Time synchronization prevented due to[...]
- Log Categories
- TIMESYNC
- Log Message
- Time synchronization prevented due to negative delay in received packet.
- Default Log Severity
- Notice
- Parameters
-
- Explanation
- A received time from a timeserver has a negative delay.
- Gateway Action
- None
- Action Description
- The received time is discarded
- Proposed Action
- None
2.52.3. [ID: 635] Time synchronization prevented due to[...]
- Log Categories
- TIMESYNC
- Log Message
- Time synchronization prevented due to security validation.
- Default Log Severity
- Warning
- Parameters
-
- Explanation
- A received packet from a timeserver did not pass security validation.
- Gateway Action
- None
- Action Description
- The received time is discarded
- Proposed Action
- None
2.52.4. [ID: 386] Communication with server has failed
- Log Categories
- TIMESYNC
- Log Message
- Communication with server has failed.
- Default Log Severity
- Warning
- Parameters
- serverip, reason
- Explanation
- Communication with a server has failed and cannot be used for time synchronization.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- Check configuration settings for time synchronization.
2.52.5. [ID: 524] Time synchronization is currently impossible
- Log Categories
- TIMESYNC
- Log Message
- Time synchronization is currently impossible.
- Default Log Severity
- Error
- Parameters
-
- Explanation
- No communication can be established with any timeservers, making time synchronization impossible.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- Check configuration settings for time synchronization.
2.52.6. [ID: 385] The clock has drifted so much that it is not[...]
- Log Categories
- TIMESYNC
- Log Message
- The clock has drifted so much that it is not within the maximum allowed correction interval. The clock will not be updated.
- Default Log Severity
- Notice
- Parameters
- offset, max
- Explanation
- A received time from a timeserver was outside of the maximum allowed time adjustment setting.
- Gateway Action
- Discard
- Action Description
- The received time is discarded
- Proposed Action
- None
2.52.7. [ID: 529] Time has been synchronized
- Log Categories
- TIMESYNC
- Log Message
- Time has been synchronized.
- Default Log Severity
- Notice
- Parameters
- time, old, serverip, name
- Explanation
- Time has been synchronized.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None