These log messages refer to the NETCON category.
2.33.1. [ID: 588] Netcon CLI instance closed
- Log Categories
- NETCON
- Log Message
- Netcon CLI instance closed.
- Default Log Severity
- Information
- Parameters
- ip, port
- Explanation
- The Netcon CLI session was closed.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.2. [ID: 305] Netcon CLI instance failed
- Log Categories
- NETCON
- Log Message
- Netcon CLI instance failed.
- Default Log Severity
- Error
- Parameters
- ip, port
- Explanation
- The Netcon CLI session could not be started.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.3. [ID: 620] Too many Netcon CLI instances
- Log Categories
- NETCON
- Log Message
- Too many Netcon CLI instances.
- Default Log Severity
- Notice
- Parameters
- ip, port
- Explanation
- The Netcon CLI session was denied because the maximum number of open sessions was reached.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.4. [ID: 501] Netcon CLI instance started
- Log Categories
- NETCON
- Log Message
- Netcon CLI instance started.
- Default Log Severity
- Information
- Parameters
- ip, port
- Explanation
- The Netcon CLI session was started.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.5. [ID: 608] Failed to open file for writing
- Log Categories
- NETCON
- Log Message
- Failed to open file for writing.
- Default Log Severity
- Error
- Parameters
- file, ip, port
- Explanation
- The file could not be upploaded because the target file could not be opened for writing.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.6. [ID: 346] New Netcon connection
- Log Categories
- NETCON
- Log Message
- New Netcon connection.
- Default Log Severity
- Notice
- Parameters
- ip, port
- Explanation
- The Netcon connection was opened.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.7. [ID: 243] Disconnecting Netcon peer
- Log Categories
- NETCON
- Log Message
- Disconnecting Netcon peer.
- Default Log Severity
- Notice
- Parameters
- ip, port
- Explanation
- The Netcon connection was closed.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.8. [ID: 539] Uploaded file could not be written to disk
- Log Categories
- NETCON,SYSTEM
- Log Message
- Uploaded file could not be written to disk.
- Default Log Severity
- Error
- Parameters
- file
- Explanation
- The file could not be uploaded because the target file could not be written to disk.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.9. [ID: 480] File transfer to host completed
- Log Categories
- NETCON
- Log Message
- File transfer to host completed.
- Default Log Severity
- Information
- Parameters
- file, filesize, ip, port
- Explanation
- The file was downloaded successfully.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.10. [ID: 349] File download requested by host failed
- Log Categories
- NETCON
- Log Message
- File download requested by host failed.
- Default Log Severity
- Error
- Parameters
- file, ip, port
- Explanation
- The file could not be downloaded over Netcon.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.11. [ID: 160] Could not open requested file
- Log Categories
- NETCON
- Log Message
- Could not open requested file.
- Default Log Severity
- Error
- Parameters
- file, ip, port
- Explanation
- The file could not be downloaded over Netcon because the file could not be opened.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.12. [ID: 201] File transfer to host started
- Log Categories
- NETCON
- Log Message
- File transfer to host started.
- Default Log Severity
- Information
- Parameters
- file, filesize, ip, port
- Explanation
- The file download over Netcon has been started.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.13. [ID: 550] File cannot be received since too many Netcon[...]
- Log Categories
- NETCON
- Log Message
- File cannot be received since too many Netcon peers are transferring files simultaneously.
- Default Log Severity
- Warning
- Parameters
- file, ip, port
- Explanation
- The file could not be uploaded over Netcon because the maximum number of simultanous file transfers was reached.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.14. [ID: 152] File cannot be sent since too many Netcon[...]
- Log Categories
- NETCON
- Log Message
- File cannot be sent since too many Netcon peers are transferring files simultaneously.
- Default Log Severity
- Warning
- Parameters
- file, ip, port
- Explanation
- The file could not be downloaded over Netcon because the maximum number of simultanous file transfers was reached.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.15. [ID: 112] Receiving file from host
- Log Categories
- NETCON
- Log Message
- Receiving file from host.
- Default Log Severity
- Information
- Parameters
- file, filesize, ip, port
- Explanation
- The file upload has been started.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.16. [ID: 1721] Invalid file name
- Log Categories
- NETCON
- Log Message
- Invalid file name.
- Default Log Severity
- Error
- Parameters
- file, ip, port
- Explanation
- The name of the file to upload did not specify a valid path.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.17. [ID: 441] A listening socket for Netcon could not be[...]
- Log Categories
- NETCON
- Log Message
- A listening socket for Netcon could not be set up.
- Default Log Severity
- Critical
- Parameters
- ip, port
- Explanation
- The socket for incomming Netcon connectins could not be set up during intitialization.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.18. [ID: 137] Netcon logger instance closed
- Log Categories
- NETCON
- Log Message
- Netcon logger instance closed.
- Default Log Severity
- Information
- Parameters
- ip, port
- Explanation
- The Netcon logger session was closed.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.19. [ID: 544] Netcon logger instance failed
- Log Categories
- NETCON
- Log Message
- Netcon logger instance failed.
- Default Log Severity
- Error
- Parameters
- ip, port
- Explanation
- The Netcon logger session could not be started.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.20. [ID: 368] Netcon logger instance started
- Log Categories
- NETCON
- Log Message
- Netcon logger instance started.
- Default Log Severity
- Information
- Parameters
- ip, port
- Explanation
- The Netcon logger session was started.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.21. [ID: 1731] Netcon login failed
- Log Categories
- NETCON
- Log Message
- Netcon login failed.
- Default Log Severity
- Notice
- Parameters
- ip, port
- Explanation
- A Netcon connection could not be logged in to the system due to an internal error.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.22. [ID: 1724] Netcon logout failed
- Log Categories
- NETCON
- Log Message
- Netcon logout failed.
- Default Log Severity
- Notice
- Parameters
- ip, port
- Explanation
- A Netcon connection could not be logged out from the system due to an internal error.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.23. [ID: 138] Insufficient RAM to start CLI session
- Log Categories
- NETCON,SYSTEM
- Log Message
- Insufficient RAM to start CLI session.
- Default Log Severity
- Error
- Parameters
-
- Explanation
- There was not enough free RAM to start a Netcon CLI session.
- Gateway Action
- Abort
- Action Description
- None
- Proposed Action
- None
2.33.24. [ID: 116] Insufficient RAM to initialize Netcon
- Log Categories
- NETCON,SYSTEM
- Log Message
- Insufficient RAM to initialize Netcon.
- Default Log Severity
- Critical
- Parameters
-
- Explanation
- There was not enough free RAM to start the Netcon service.
- Gateway Action
- Abort
- Action Description
- None
- Proposed Action
- None
2.33.25. [ID: 1732] Failed to validate Netcon proposal
- Log Categories
- NETCON
- Log Message
- Failed to validate Netcon proposal.
- Default Log Severity
- Error
- Parameters
- ip, port
- Explanation
- Netcon connection was denied due to issue(s) in the proposal.
- Gateway Action
- Deny
- Action Description
- None
- Proposed Action
- Ensure that the connecting peer is using supported client software and the correct key.
2.33.26. [ID: 502] File upload aborted by host
- Log Categories
- NETCON
- Log Message
- File upload aborted by host.
- Default Log Severity
- Information
- Parameters
- file, ip, port
- Explanation
- The file upload over Netcon was aborted.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.27. [ID: 255] File upload completed successfully
- Log Categories
- NETCON
- Log Message
- File upload completed successfully.
- Default Log Severity
- Information
- Parameters
- file, filesize, ip, port
- Explanation
- The file was successfully uploaded over Netcon.
- Gateway Action
- None
- Action Description
- None
- Proposed Action
- None
2.33.28. [ID: 542] File upload from host failed
- Log Categories
- NETCON
- Log Message
- File upload from host failed.
- Default Log Severity
- Error
- Parameters
- file, ip, port, reason
- Explanation
- The file upload over Netcon failed.
- Gateway Action
- Abort
- Action Description
- None
- Proposed Action
- None
cOS Stream 4.00.03 Log Reference Guide
