Properties

Name

Specifies a symbolic name for the authentication source. (Identifier)

RoutingTable

Specifies the routing table to use for communication with the RADIUS server. (Default: main)

IPAddress

The IP address of the server.

Port

The UDP port of the server. (Default: 1812)

RetryTimeout

The retry timeout, in milliseconds, used when trying to contact the RADIUS server. If no response has been given after for example 2 seconds, the firewall will try again by sending a new Request packet. (Default: 2000)

NumRetries

How many retries should be sent when trying to contact the RADIUS accounting server. If no response has been given after for example 2 seconds, the firewall will try again by sending a new Request packet. (Default: 3)

SharedSecret

The shared secret phrase for the Authenticator generation.

NASIdentifier

Value of the Radius attribute NAS-Identifier in Radius requests. (Optional)

EnableCallingStationID

Enable Calling Station ID and Called Station ID in RADIUS messages. (Default: Yes)

EnableFramedIP

Include Framed IP address in the RADIUS Access Request message. (Default: No)

RequireMsgAuth

Silently discard any response packet without the Message Authenticator attribute (recommended). (Default: No)

LogEnabled

Enable logging. (Default: Yes)

Comments

Text describing the current object. (Optional)