Properties

Name

Specifies a symbolic name for the log receiver. (Identifier)

RoutingTable

Specifies the routing table to use for communication with the log receiver. (Default: main)

IPAddress

Destination IP address.

Port

Destination port. (Default: 162)

SysName

The name for this managed node. If left 'empty' the device system name will be used. (Optional)

RepeatCount

Repetition counter. (Default: 0)

LogSeverity

Specifies the minimum log severity level required to send logs to the receiver. (Optional; Default: Emergency,Alert,Critical,Error,Warning,Notice,Information)

SendRateLimit

The maximum rate of log messages that is allowed to be sent per second. (Default: 2000)

UserName

SNMPv3 username.

AuthenticationPassword

SNMPv3 authentication password. (Optional)

SecurityLevel

SNMPv3 security level. (Default: AuthPriv)

AuthenticationMethod

SNMPv3 authentication method. (Default: HMAC-SHA1-96)

PrivacyPassword

SNMPv3 encryption/decryption password. (Optional)

Comments

Text describing the current object. (Optional)