Properties

Name

Name of this interface. (Identifier)

StitchInterface

Specifies the IPsec tunnel that this GTP tunnel is stitched to. (Optional)

LocalEndpoint

Specifies the outer IP address of the GTP interface. (Optional)

OuterRoutingTable

The outer Routing Table to use for the GTP-C and GTP-U traffic. (Default: main)

EndUserDNS

End User DNS that clients will use. (Optional)

FakeDHCPServer

Address to use in DHCPINFORM Responses.

ChargingCharacteristics

A set of vendor specified flags. (Optional)

OverrideGGSNEUDNS

Override any End User DNS information received from GGSN. (Default: No)

RoundRobinDNS

Use Round robin between hosts when DNS name contains multiple hosts. (Default: No)

InterceptDHCPInform

Intercept DHCPINFORM messages from clients that request P-CSCF information. (Default: No)

SeqNumCheck

Sequence Number Checking on user data packets. (Default: No)

ShortAPNDNS

Use only the first label in the APN for DNS resolving the GGSN's IP-addresses. (Default: No)

ShortAPNGGSN

Send only the first label in the APN to the GGSN. (Default: No)

SendRATType

Send the RAT-Type information element. (Default: Yes)

UsePreferredIP

Negotiate End User Address using IP address proposed by client. (Default: No)

MaxRetransmits

Maximum number of resends for a message before the system considers the link down. (Default: 30)

RetransmitInterval

Seconds between resending non-acknowledged messages. (Default: 2)

PathCheckInterval

Seconds between path checks. (Default: 60)

FailedTimeout

Seconds a failed GGSN connection is kept in memory. (Default: 0)

TunnelLimit

Maximum allowed GTP Tunnels. (Default: 100000)

MaxSeqDistance

Maximum allowed distance a sequence number can be from expected without being dropped. (Default: 5)

RecSeqSet

Number of previous accepted sequence numbers to compare against for validation. (Default: 6)

ResolveAPNInterval

Seconds between new resolve for an APN. (Default: 300)

SelectionMode

Selection mode indicates the origin of the APN. (Default: MSNotVerfied)

RATType

RAT type sent to GGSN on when establishing a tunnel. (Default: WLAN)

AllocRetPrio

Allocation/Retention Priority field of QoS sent to GGSN. (Default: Low)

TrafficClass

Traffic class. (Default: Subscribed)

TrafficHandlingPriority

Traffic handling priority. (Default: Subscribed)

MaxSDUSize

Maximum SDU size, with a granularity of ten bytes. (Default: 1500)

MaxBitRateUplink

Maximum bitrate uplink in kbps. (Default: 8640)

MaxBitRateDownlink

Maximum bitrate downlink in kbps. (Default: 16000)

DelayClass

Delay class. (Default: 4)

ReliabilityClass

Reliability class. (Default: 3)

PeakThroughput

Peak throughput. (Default: 1)

PrecedenceClass

Precedence class. (Default: 3)

MeanThroughput

Mean throughput. (Default: 0)

DeliveryErroneousSDU

Delivery of erroneous SDU. (Default: 3)

ResidualBER

Residual bit error rate (BER). (Default: 8)

SDUErrorRatio

SDU error ratio. (Default: 4)

TransferDelay

Transfer delay. (Default: 0)

GuaranteedBitRateUplink

Guaranteed bit rate uplink in kbps. (Default: 0)

GuaranteedBitRateDownlink

Guaranteed bit rate downlink in kbps. (Default: 0)

SignalingIndication

Signaling indication. (Default: 0)

SourceStatisticsDescriptor

Source statistics descriptor. (Default: 0)

DeliveryOrder

Enable Delivery order. (Default: No)

AutoInterfaceNetworkRoute

Automatically add a route for this interface using the given remote network. (Default: Yes)

UpdatePDPContextResp

Specifies how to respond to Update PDP Context Requests from a GGSN. (Default: ServiceNotSupported)

EndMarkerSupport

Enable support for End Marker messages. (Default: No)

CopyDSCP

Copy the DSCP (Differentiated Services Codepoint) value from the inner to the outer IP header of GTP-U messages. (Default: No)

HASyncInterval

The number of packets received or sent between sequence number synchronization for GTP-U. A value of 0 will cause a synchronization every 2*MaxSeqDistance. (Default: 0)

DSCP

Specifies the DSCP (Differentiated Services Codepoint) value to set in the outer IP header. This value is ignored if copying is enabled. (Default: 0)

UDPChksum

Specifies how to handle GTP-U UDP checksum. (Default: Ignore)

MTU

Specifies the size (in bytes) of the largest packet that can be forwarded. (Default: 1500)

IPAddress

The interface's IP addresses. (Default: 0)

IP4Broadcast

The interface's IPv4 broadcast address. (Optional)

RoutingTableMembership

Interface's routing table membership. (Default: <all>)

SecurityEquivalentInterfaces

Security and transport equivalent interfaces. (Optional)

Zone

Specifies the zone that this interface is a member of. (Optional)

Comments

Text describing the current object. (Optional)