Home  Prev  cOS Core 15.00.01 Log Reference Guide  Next

2.50. OSPF

These log messages refer to the OSPF (OSPF events) category.

2.50.1. internal_error (ID: 02400001)

Default Severity
WARNING
Log Message
Internal Error. Iface <iface> got IEvent <ievent> in IState <istate>. Ignored
Explanation
Internal error in the OSPF interface state engine.
Firewall Action
ignore
Recommended Action
Contact support.
Revision
1
Parameters
iface
ievent
istate
Context Parameters
Rule Name

2.50.2. internal_error (ID: 02400002)

Default Severity
WARNING
Log Message
Internal Error. Iface <iface> got NEvent <nevent> in NState <nstate>. Ignored
Explanation
Internal error in the OSPF interface neighbor state engine.
Firewall Action
ignore
Recommended Action
Contact support.
Revision
1
Parameters
iface
nevent
nstate
Context Parameters
Rule Name

2.50.3. unable_to_map_ptp_neighbor (ID: 02400003)

Default Severity
WARNING
Log Message
Unable to map PTP neighbor <neighborid> to my ip <myifaceip> at HA failover
Explanation
Unable to map a configured PTP neighbor to the local IP at HA failover.
Firewall Action
None
Recommended Action
Check OSPF interface configuration.
Revision
1
Parameters
iface
neighborid
myifaceip
Context Parameters
Rule Name

2.50.4. bad_packet_len (ID: 02400004)

Default Severity
WARNING
Log Message
Received OSPF packet with bad length
Explanation
Received OSPF packet with a bad length.
Firewall Action
drop
Recommended Action
Check the configuration on the neighboring router.
Revision
1
Parameters
ospflen
iplen
type
Context Parameters
Rule Name
Packet Buffer

2.50.5. bad_ospf_version (ID: 02400005)

Default Severity
WARNING
Log Message
Packet OSPF version is not 2
Explanation
Received OSPF packet with other version than 2.
Firewall Action
drop
Recommended Action
Make sure that all routers are using version 2.
Revision
1
Parameters
ver
Context Parameters
Rule Name
Packet Buffer

2.50.6. sender_not_in_iface_range (ID: 02400006)

Default Severity
WARNING
Log Message
Sender source <srcip> not within interface range (<ifacerange>)
Explanation
Received OSPF data from a neighboring router not within the receive interface range.
Firewall Action
drop
Recommended Action
Make sure all locally attached OSPF routes are on the same network.
Revision
1
Parameters
srcip
ifacerange
Context Parameters
Rule Name
Packet Buffer

2.50.7. area_mismatch (ID: 02400007)

Default Severity
WARNING
Log Message
Bad area <area>
Explanation
Received OSPF data from a neighboring router not within the same area as the receive interface.
Firewall Action
drop
Recommended Action
Make sure all locally attached OSPF routers are in the same area as the attaching interfaces.
Revision
1
Parameters
area
Context Parameters
Rule Name
Packet Buffer

2.50.8. hello_netmask_mismatch (ID: 02400008)

Default Severity
WARNING
Log Message
Hello netmask mismatch. Received was <recv_netmask>, mine is <my_netmask>. Dropping
Explanation
Received OSPF data from a neighboring router with different network netmask than the receive interface.
Firewall Action
drop
Recommended Action
Make sure all locally attached OSPF routers have the same netmask as the attaching interfaces.
Revision
1
Parameters
recv_netmask
my_netmask
Context Parameters
Rule Name
Packet Buffer

2.50.9. hello_interval_mismatch (ID: 02400009)

Default Severity
WARNING
Log Message
Hello interval mismatch. Received was <recv_interval>, mine is <my_interval>. Dropping
Explanation
Received OSPF data from a neighboring router with a mismatching hello interval.
Firewall Action
drop
Recommended Action
Make sure all locally attached OSPF routers share the same hello interval.
Revision
1
Parameters
recv_interval
my_interval
Context Parameters
Rule Name
Packet Buffer

2.50.10. hello_rtr_dead_mismatch (ID: 02400010)

Default Severity
WARNING
Log Message
Hello router dead interval mismatch. Received was <recv_rtrdead>, mine is <my_rtrdead>. Dropping
Explanation
Received OSPF data from a neighboring router with a mismatching router dead interval.
Firewall Action
drop
Recommended Action
Make sure all locally attached OSPF routers share the same router dead interval.
Revision
1
Parameters
recv_rtrdead
my_rtrdead
Context Parameters
Rule Name
Packet Buffer

2.50.11. hello_e_flag_mismatch (ID: 02400011)

Default Severity
WARNING
Log Message
Hello E-flag mismatch. Received was <recv_e_flag>, mine is <my_e_flag>. Dropping
Explanation
Received OSPF data from a neighboring router with mismatching E-flag (describes how AS-external-LSAs are flooded) configuration.
Firewall Action
drop
Recommended Action
Make sure all locally attached OSPF routers share the same E-flag configuration.
Revision
1
Parameters
recv_e_flag
my_e_flag
Context Parameters
Rule Name
Packet Buffer

2.50.12. hello_n_flag_mismatch (ID: 02400012)

Default Severity
WARNING
Log Message
Hello N-flag mismatch. Received was <recv_n_flag>, mine is <my_n_flag>. Dropping
Explanation
Received OSPF data from a neighboring router with mismatching N-flag (NSSA details) configuration.
Firewall Action
drop
Recommended Action
Make sure all locally attached OSPF routers share the same N-flag configuration.
Revision
1
Parameters
recv_n_flag
my_n_flag
Context Parameters
Rule Name
Packet Buffer

2.50.13. both_np_and_e_flag_set (ID: 02400013)

Default Severity
WARNING
Log Message
Hello N-flag and E-flag set. This is a illegal combination. Dropping
Explanation
Received OSPF data from a neighboring router which illegally have both the N and E-flag set.
Firewall Action
drop
Recommended Action
Check the configuration on the neighboring router.
Revision
1
Context Parameters
Rule Name
Packet Buffer

2.50.14. unknown_lsa_type (ID: 02400014)

Default Severity
WARNING
Log Message
Unknown LSA type <lsatype>. Dropping
Explanation
Received OSPF data from a neighbor which contained a unknown LSA.
Firewall Action
drop
Recommended Action
Check the configuration on the neighboring router.
Revision
1
Parameters
lsatype
Context Parameters
Rule Name
Packet Buffer

2.50.15. auth_mismatch (ID: 02400050)

Default Severity
WARNING
Log Message
Authentication mismatch. Received was <recv_auth>, mine is <my_auth>
Explanation
Authentication mismatch with neighboring OSPF router.
Firewall Action
drop
Recommended Action
Verify that the neighboring OSPF router share the same authentication.
Revision
1
Parameters
recv_auth
my_auth
Context Parameters
Rule Name

2.50.16. bad_auth_password (ID: 02400051)

Default Severity
WARNING
Log Message
Authentication mismatch. Bad password
Explanation
Authentication failed due to a bad password.
Firewall Action
drop
Recommended Action
Verify that the neighboring OSPF router share the same password.
Revision
1
Context Parameters
Rule Name

2.50.17. bad_auth_crypto_key_id (ID: 02400052)

Default Severity
WARNING
Log Message
Authentication mismatch. Bad crypto key id. Received was <recv_id>, mine is <my_id>
Explanation
Authentication failed due to a bad crypto key id.
Firewall Action
drop
Recommended Action
Verify that the neighboring OSPF router share the same crypto key id.
Revision
1
Parameters
recv_id
my_id
Context Parameters
Rule Name

2.50.18. bad_auth_crypto_seq_number (ID: 02400053)

Default Severity
WARNING
Log Message
Authentication mismatch. Bad crypto sequence number. Received was <recv_seq>, expected atleast <my_seq>
Explanation
Authentication failed due to mismatching crypto sequence number.
Firewall Action
drop
Recommended Action
None
Revision
1
Parameters
recv_seq
my_seq
Context Parameters
Rule Name

2.50.19. bad_auth_crypto_digest (ID: 02400054)

Default Severity
WARNING
Log Message
Authentication mismatch. Bad crypto digest
Explanation
Authentication failed due to bad crypto digest.
Firewall Action
drop
Recommended Action
Verify that the neighboring OSPF router share the same crypto digest.
Revision
1
Context Parameters
Rule Name

2.50.20. checksum_mismatch (ID: 02400055)

Default Severity
WARNING
Log Message
Checksum mismatch. Received was <recv_chksum>, mine is <my_chksum>
Explanation
Received OSPF data from neighbor with mismatching checksum.
Firewall Action
drop
Recommended Action
Check network equipment for problems.
Revision
1
Parameters
recv_chksum
my_chksum
Context Parameters
Rule Name

2.50.21. dd_mtu_exceeds_interface_mtu (ID: 02400100)

Default Severity
WARNING
Log Message
Neighbor <neighbor> MTU is too high. Received DD has MTU <dd_mtu>. Interface MTU is <iface_mtu>
Explanation
Received database description from neighbor with too high MTU.
Firewall Action
drop
Recommended Action
Lower the MTU on the neighboring OSPF router.
Revision
1
Parameters
neighbor
dd_mtu
iface_mtu
Context Parameters
Rule Name

2.50.22. m_ms_mismatch (ID: 02400101)

Default Severity
WARNING
Log Message
Neighbor <neighbor> M/MS mismatch. Restarting exchange
Explanation
Received indication that a neighbor got the M/MS (master/slave) role wrong.
Firewall Action
restart
Recommended Action
None
Revision
1
Parameters
neighbor
Context Parameters
Rule Name

2.50.23. i_flag_misuse (ID: 02400102)

Default Severity
WARNING
Log Message
Neighbor <neighbor> misused the I-flag. Restarting exchange
Explanation
Neighbor misused the I-flag.
Firewall Action
restart
Recommended Action
None
Revision
1
Parameters
neighbor
Context Parameters
Rule Name

2.50.24. opt_change (ID: 02400103)

Default Severity
WARNING
Log Message
Neighbor <neighbor> changed options during exchange. Restarting exchange
Explanation
Neighbor illegally changed options during the exchange phase.
Firewall Action
restart
Recommended Action
None
Revision
1
Parameters
neighbor
Context Parameters
Rule Name

2.50.25. bad_seq_num (ID: 02400104)

Default Severity
WARNING
Log Message
Neighbor <neighbor> replied with a unexpected sequence number. Restarting exchange
Explanation
Received neighbor reply with a unexpected sequence number.
Firewall Action
restart
Recommended Action
None
Revision
1
Parameters
neighbor
Context Parameters
Rule Name

2.50.26. non_dup_dd (ID: 02400105)

Default Severity
WARNING
Log Message
Neighbor <neighbor> sent a non dup DD from a higher state than exchange. Restarting exchange
Explanation
Received a non dup database descriptor from a neighbor in a higher state than exchange.
Firewall Action
restart
Recommended Action
None
Revision
2
Parameters
neighbor
Context Parameters
Rule Name

2.50.27. as_ext_on_stub (ID: 02400106)

Default Severity
WARNING
Log Message
Neighbor <neighbor> implied AS-EXT on a stub area. Restarting exchange
Explanation
A neighbor illegally implied AS-EXT on a stub area.
Firewall Action
restart
Recommended Action
Check neighboring OSPF router configuration.
Revision
1
Parameters
neighbor
Context Parameters
Rule Name

2.50.28. unknown_lsa (ID: 02400107)

Default Severity
WARNING
Log Message
Neighbor <neighbor> implied unknown LSA (<lsa_type>). Restarting exchange
Explanation
A neighbor described an unknown LSA type.
Firewall Action
restart
Recommended Action
Check neighboring OSPF router configuration.
Revision
1
Parameters
neighbor
lsa_type
Context Parameters
Rule Name

2.50.29. bad_lsa_sequencenumber (ID: 02400108)

Default Severity
WARNING
Log Message
Got LSA with bad sequence number <seqnum>. Restarting exchange
Explanation
Received a LSA with a bad sequence number.
Firewall Action
restart
Recommended Action
None
Revision
1
Parameters
seqnum
Context Parameters
Rule Name

2.50.30. bad_lsa_maxage (ID: 02400109)

Default Severity
WARNING
Log Message
Got LSA with bad maxage (<maxage> > <def_maxage>). Restarting exchange
Explanation
Received a LSA with a bad maxage value.
Firewall Action
restart
Recommended Action
Check orginating router configuration.
Revision
1
Parameters
maxage
def_maxage
Context Parameters
Rule Name

2.50.31. lsa_checksum_mismatch (ID: 02400150)

Default Severity
WARNING
Log Message
LSA checksum mismatch. LSA is discarded
Explanation
Received LSA with mismatching checksum.
Firewall Action
discard
Recommended Action
Check network equipment for problems.
Revision
1
Context Parameters
Rule Name

2.50.32. unknown_lsa_type (ID: 02400151)

Default Severity
WARNING
Log Message
Unknown LSA type (<lsa_type>). LSA is discarded
Explanation
Received LSA of unknown type.
Firewall Action
discard
Recommended Action
Check originating router configuration.
Revision
1
Parameters
lsa_type
Context Parameters
Rule Name

2.50.33. bad_lsa_sequencenumber (ID: 02400152)

Default Severity
WARNING
Log Message
Bad LSA sequence number (<seqnum>). LSA is discarded
Explanation
Received LSA with a bad sequence number.
Firewall Action
discard
Recommended Action
None
Revision
1
Parameters
seqnum
Context Parameters
Rule Name

2.50.34. bad_lsa_maxage (ID: 02400153)

Default Severity
WARNING
Log Message
Bad LSA maxage (<maxage>). LSA is discarded
Explanation
Received LSA with a bad max age.
Firewall Action
discard
Recommended Action
None
Revision
1
Parameters
maxage
Context Parameters
Rule Name

2.50.35. received_as_ext_on_stub (ID: 02400154)

Default Severity
WARNING
Log Message
Received AS-EXT LSA on stub. LSA is discarded
Explanation
Received AS external LSA which is illegal on a stub area.
Firewall Action
discard
Recommended Action
None
Revision
1
Context Parameters
Rule Name

2.50.36. received_selforg_for_unknown_lsa_type (ID: 02400155)

Default Severity
WARNING
Log Message
Received selforiginated LSA for unknown LSA <lsatype> type? Flushing
Explanation
Received selforiginated LSA of unknown type.
Firewall Action
flush
Recommended Action
None
Revision
1
Parameters
lsatype
Context Parameters
Rule Name

2.50.37. db_copy_more_recent_than_received (ID: 02400156)

Default Severity
WARNING
Log Message
Received LSA(LSA-<lsa> ID:<lsaid> AdvRtr:<lsartr>) is older than DB copy. Discarding received LSA
Explanation
Received LSA which is older than the copy in the database.
Firewall Action
discard
Recommended Action
None
Revision
2
Parameters
lsa
lsaid
lsartr
Context Parameters
Rule Name

2.50.38. got_ack_mismatched_lsa (ID: 02400157)

Default Severity
WARNING
Log Message
Got ACK for mismatched LSA (LSA-<lsa> ID:<lsaid> AdvRtr:<lsartr>). ACK ingored
Explanation
Received acknowledge for mismatched LSA.
Firewall Action
None
Recommended Action
None
Revision
1
Parameters
lsa
lsaid
lsartr
Context Parameters
Rule Name

2.50.39. upd_packet_lsa_size_mismatch (ID: 02400158)

Default Severity
WARNING
Log Message
UPD packet LSA size mismatch. Parsing aborted
Explanation
Received OSPF UPD packet with a mismatching LSA size.
Firewall Action
abort
Recommended Action
None
Revision
1
Context Parameters
Rule Name
Packet Buffer

2.50.40. req_packet_lsa_size_mismatch (ID: 02400159)

Default Severity
WARNING
Log Message
REQ packet LSA size mismatch. Parsing aborted
Explanation
Received OSPF REQ packet with a mismatching LSA size.
Firewall Action
abort
Recommended Action
None
Revision
1
Context Parameters
Rule Name
Packet Buffer

2.50.41. ack_packet_lsa_size_mismatch (ID: 02400160)

Default Severity
WARNING
Log Message
ACK packet LSA size mismatch. Parsing aborted
Explanation
Received OSPF ACK packet with a mismatching LSA size.
Firewall Action
abort
Recommended Action
None
Revision
1
Context Parameters
Rule Name
Packet Buffer

2.50.42. failed_to_create_replacement_lsa (ID: 02400161)

Default Severity
CRITICAL
Log Message
Failed to prepare replacement LSA (LSA- <lsa> ID:<lsaid> AdvRtr:<lsartr>)
Explanation
Failed to create LSA.
Firewall Action
alert
Recommended Action
Check memory consumption.
Revision
1
Parameters
lsa
lsaid
lsartr
Context Parameters
Rule Name

2.50.43. unable_to_send_ack (ID: 02400162)

Default Severity
CRITICAL
Log Message
Unable to send ACK
Explanation
Unable to send acknowledgement.
Firewall Action
alert
Recommended Action
Check memory consumption.
Revision
1
Context Parameters
Rule Name

2.50.44. got_router_lsa_mismatched_fields (ID: 02400163)

Default Severity
WARNING
Log Message
Received Router LSA which contains mismatched Link State ID:(<lsaid>) and Advertising Router:(<lsartr>). LSA is discarded
Explanation
Received LSA of incompatible Link State ID and Advertising Router.
Firewall Action
discard
Recommended Action
None
Revision
2
Parameters
lsaid
lsartr
Context Parameters
Rule Name

2.50.45. unknown_neighbor (ID: 02400200)

Default Severity
WARNING
Log Message
Unknown neighbor(IP:<neighbor> ID:<neighborid>) seen on <iface>. Ignoring
Explanation
Unknown neighbor seen on PTP based interface.
Firewall Action
None
Recommended Action
Check for incorrectly configured neighbors.
Revision
1
Parameters
neighbor
neighborid
iface
Context Parameters
Rule Name

2.50.46. too_many_neighbors (ID: 02400201)

Default Severity
WARNING
Log Message
Too many neighbors on <iface>. Unable to maintain 2-way with all of them(hello packet)
Explanation
There are too many OSPF routers on a directly connected network.
Firewall Action
None
Recommended Action
Reduce the number of OSPF routers on the network.
Revision
1
Parameters
iface
Context Parameters
Rule Name

2.50.47. neighbor_died (ID: 02400202)

Default Severity
WARNING
Log Message
Neighbor <neighbor> on <neighboriface> died
Explanation
Lost connectivity with neighbor router.
Firewall Action
None
Recommended Action
Check neighbor status and connectivity.
Revision
1
Parameters
neighbor
neighboriface
Context Parameters
Rule Name

2.50.48. unable_to_find_transport_area (ID: 02400300)

Default Severity
WARNING
Log Message
Unable to find transport area <area> for VLINK <vlink> when building router LSA. Iface skipped
Explanation
Unable to find transport area for a vlink.
Firewall Action
skip_iface
Recommended Action
Check OSPF area configuration.
Revision
1
Parameters
area
vlink
Context Parameters
Rule Name

2.50.49. internal_error_unable_to_map_identifier (ID: 02400301)

Default Severity
WARNING
Log Message
Internal error: Unable to map a identifier for LSA Type:<lsatype> ID:<lsaid> AdvRouter:<lsaadvrtr>
Explanation
Unable to map an identifier for a LSA.
Firewall Action
None
Recommended Action
None
Revision
1
Parameters
lsatype
lsaid
lsaadvrtr
Context Parameters
Rule Name

2.50.50. lsa_size_too_big (ID: 02400302)

Default Severity
WARNING
Log Message
Requested LSA size(<lsasize>) too big. Unable to create LSA
Explanation
Unable to create LSA since the size is too big.
Firewall Action
None
Recommended Action
None
Revision
1
Parameters
lsasize
Context Parameters
Rule Name

2.50.51. memory_usage_exceeded_70_percent_of_max_allowed (ID: 02400303)

Default Severity
WARNING
Log Message
Memory usage for OSPF process <ospfproc> have now exceeded 70 percent of the maximum allowed
Explanation
The memory usage for a OSPF process have exceeded 70 percent of the maximum allowed.
Firewall Action
None
Recommended Action
Check memory consumption.
Revision
1
Parameters
ospfproc
Context Parameters
Rule Name

2.50.52. memory_usage_exceeded_90_percent_of_max_allowed (ID: 02400304)

Default Severity
WARNING
Log Message
Memory usage for OSPF process <ospfproc> have now exceeded 90 percent of the maximum allowed
Explanation
The memory usage for a OSPF process have exceeded 70 percent of the maximum allowed.
Firewall Action
None
Recommended Action
Check memory consumption.
Revision
1
Parameters
ospfproc
Context Parameters
Rule Name

2.50.53. as_disabled_due_to_mem_alloc_fail (ID: 02400305)

Default Severity
CRITICAL
Log Message
AS disabled due to memory allocation failure
Explanation
An OSPF AS have been disabled due to memory allocation failure.
Firewall Action
alert
Recommended Action
Check memory consumption.
Revision
1
Context Parameters
Rule Name

2.50.54. internal_lsa_chksum_error (ID: 02400306)

Default Severity
CRITICAL
Log Message
LSA internal checksum error
Explanation
Internal LSA checksum error.
Firewall Action
alert
Recommended Action
Check hardware for defects.
Revision
1
Context Parameters
Rule Name

2.50.55. unable_to_find_iface_to_stub_net (ID: 02400400)

Default Severity
WARNING
Log Message
Internal error: Unable to find my interface attached to stub network <stub>
Explanation
Unable to find local interface attached to stub network.
Firewall Action
None
Recommended Action
Contact support with a scenario description.
Revision
1
Parameters
stub
Context Parameters
Rule Name

2.50.56. internal_error_unable_to_find_lnk_connecting_to_lsa (ID: 02400401)

Default Severity
WARNING
Log Message
Internal error: Unable to find my link connecting to described LSA (NetVtxId: <netvtxid>)
Explanation
Unable to find local link to described LSA.
Firewall Action
None
Recommended Action
Contact support with a scenario description.
Revision
1
Parameters
netvtxid
Context Parameters
Rule Name

2.50.57. internal_error_unable_to_find_iface_connecting_to_lsa (ID: 02400402)

Default Severity
WARNING
Log Message
Internal error: Unable to find my interface connecting to described LSA (NetVtxId: <netvtxid>)
Explanation
Unable to find local interface connecting to described LSA.
Firewall Action
None
Recommended Action
Contact support with a scenario description.
Revision
1
Parameters
netvtxid
Context Parameters
Rule Name

2.50.58. internal_error_unable_to_find_lnk_connecting_to_lsa (ID: 02400403)

Default Severity
WARNING
Log Message
Internal error: Unable to find my link connecting to described LSA (RtrVtxId: <rtrvtxid>)
Explanation
Unable to find local link connecting to described LSA.
Firewall Action
None
Recommended Action
Contact support with a scenario description.
Revision
1
Parameters
rtrvtxid
Context Parameters
Rule Name

2.50.59. internal_error_unable_to_find_iface_connecting_to_lsa (ID: 02400404)

Default Severity
WARNING
Log Message
Internal error: Unable to find my interface connecting to described LSA (RtrVtxId: <rtrvtxid>)
Explanation
Unable to find local interface connecting to descried LSA.
Firewall Action
None
Recommended Action
Contact support with a scenario description.
Revision
1
Parameters
rtrvtxid
Context Parameters
Rule Name

2.50.60. internal_error_unable_neighbor_iface_attached_back_to_me (ID: 02400405)

Default Severity
WARNING
Log Message
Internal error: Unable to find neighbor (RtrVtxId: <rtrvtxid>) interface attached back to me
Explanation
Unable to find neighbor interface attached back.
Firewall Action
None
Recommended Action
Contact support with a scenario description.
Revision
1
Parameters
rtrvtxid
Context Parameters
Rule Name

2.50.61. bad_iface_type_mapping_rtr_to_rtr_link (ID: 02400406)

Default Severity
WARNING
Log Message
Internal error: Bad interface type (<ifacetype>) when mapping rtr-to-rtr (RtrVtxId:<rtrvtxid>)
Explanation
Bad interface type found when doing router-to-router mapping.
Firewall Action
None
Recommended Action
Check OSPF interface configuration.
Revision
1
Parameters
ifacetype
rtrvtxid
Context Parameters
Rule Name

2.50.62. internal_error_unable_to_find_lnk_connecting_to_lsa (ID: 02400407)

Default Severity
WARNING
Log Message
Internal error: Unable to find my link connecting to described LSA (NetVtxId:<netvtxid>)
Explanation
Unable to find local link connected to described LSA.
Firewall Action
None
Recommended Action
Contact support with a scenario description.
Revision
1
Parameters
netvtxid
Context Parameters
Rule Name

2.50.63. memory_allocation_failure (ID: 02400500)

Default Severity
CRITICAL
Log Message
Internal Error: Memory allocation failure! OSPF process now considered inconsistent
Explanation
Memory allocation failure.
Firewall Action
alert
Recommended Action
Check memory consumption.
Revision
1
Context Parameters
Rule Name

2.50.64. unable_to_send (ID: 02400501)

Default Severity
CRITICAL
Log Message
Internal Error: Unable to send (No sendbuffer?)
Explanation
Unable to get buffer for sending.
Firewall Action
alert
Recommended Action
Check buffer consumption.
Revision
1
Context Parameters
Rule Name

2.50.65. failed_to_add_route (ID: 02400502)

Default Severity
CRITICAL
Log Message
Failed to add route <route>! OSPF process should now be considered inconsistent
Explanation
Unable to add route.
Firewall Action
alert
Recommended Action
Check memory consumption.
Revision
1
Parameters
route
Context Parameters
Rule Name

Home  Prev   Next