These log messages refer to the BUFFERS (Events regarding buffer usage) category.
2.12.1. buffers_flooded (ID: 00500001)
- Default Severity
- WARNING
- Log Message
- The buffers were flooded for <duration> seconds. Current usage is <buf_usage> percent
- Explanation
- The unit was temporarily out of buffers for a period of time. This could be a result of a period of heavy network traffic
load.
- Firewall Action
- None
- Recommended Action
- If this is a reoccurring event, try increasing the number of HighBuffers.
- Revision
- 1
- Parameters
- duration
buf_usage
2.12.2. buffers_profile (ID: 00500002)
- Default Severity
- DEBUG
- Log Message
- Buffer requested by <reason> used at total of <duration> ticks and was touched <numstop> times
- Explanation
- A buffer associated with a profiling request has been identified. This log message will only be generated by special built
firmware for the purpose of debugging.
- Firewall Action
- None
- Recommended Action
- Nothing.
- Revision
- 1
- Parameters
- numstop
duration
reason
- Context Parameters
- Packet Buffer
cOS Core 15.00.01 Log Reference Guide
