Properties

AutoAddMulticastCoreRoute

Auto generate core route for "224.0.0.1-239.255.255.255". (Default: Yes)

IGMPBeforeRules

Allows IGMP traffic to enter the firewall by default. (Default: Yes)

IGMPMaxGlobalRequestsPerSecond

Maximum number of requests per second. (Default: 1000)

IGMPMaxRequestsPerSecond

Maximum number of requests per interface per second. (Default: 100)

IGMPReactToOwnQueries

The firewall should always respond with Member Reports, even to Queries originating from itself. (Default: No)

IGMPRobustnessVariable

IGMP is robust to 'value' - 1 packet losses. (Default: 2)

IGMPQueryInterval

The interval (ms) between general queries sent by the firewall. (Default: 125000)

IGMPQueryResponseInterval

The maximum time (ms) until a host/client has to send an answer to a query. (Default: 10000)

IGMPStartupQueryInterval

The general query interval (ms) to use during the startup phase (Default: 1/4 of the 'IGMP Query Interval' parameter. (Default: 30000)

IGMPStartupQueryCount

The number of startup queries to send during the startup phase. (Default: 2)

IGMPLastMemberQueryInterval

The maximum time (ms) until a host/client has to send an answer to a group and group-and-source specific query. (Default: 5000)

IGMPUnsolicatedReportInterval

The time between repetitions (ms) of an initial membership report. (Default: 1000)

IGMPRouterVersion

Multiple IGMP querying routers on a network must use the same IGMP version. (Default: IGMPv3)

IGMPLowestCompatibleVersion

Lowest IGMP compatibility mode. (Default: IGMPv1)