Properties

NetconBiDirTimeout

Specifies the amount of seconds to wait for the administrator to log in before reverting to the previous configuration. (Default: 30)

WebUIBeforeRules

Enable HTTP(S) traffic to the firewall regardless of configured IP Rules. (Default: Yes)

WWWSrv_HTTPPort

Specifies the HTTP port for the web user interface. (Default: 80)

WWWSrv_HTTPSPort

Specifies the HTTPS port for the web user interface. (Default: 443)

WebUIAllowLoginAutoComplete

Allow the web browser to remember the username and password on the login page. (Default: No)

SSHBeforeRules

Enable SSH traffic to the firewall regardless of configured IP Rules. (Default: Yes)

HTTPSCertificate

Specifies host certificate to use for HTTPS management and SSL VPN. (Optional)

HTTPSRootCertificates

Specifies root certificates to use for HTTPS management and SSL VPN. (Optional)

NetconBeforeRules

Enable netcon traffic to the firewall regardless of configured IP Rules. (Default: Yes)

NetConMaxChannels

The maximum number of concurrent Netcon channels. The Netcon channels consists of the following: console, realtime logger, stat poll or send/receive file context. (Default: 18)

SNMPBeforeRules

Enable SNMP traffic to the firewall regardless of configured IP Rules. (Default: Yes)

SNMPRequestLimit

Maximum number of SNMP packets that will be processed each second. (Default: 1000)

SNMPSysContact

The contact person for this managed node. (Default: N/A)

SNMPUseDeviceName

Use the name given to the this device under Device Settings. (Default: Yes)

SNMPSysName

The name for this managed node. (Default: N/A)

SNMPSysLocation

The physical location of this node. (Default: N/A)

SNMPIfDescription

What to display in the SNMP MIB-II ifDescr variables. (Default: Name)

SNMPIfAlias

What to display in the SNMP ifMIB ifAlias variables. (Default: Hardware)

WebUIIdleTimeout

Number of seconds of inactivity until the HTTP(S) session is closed. (Default: 900)

NetconIdleTimeout

Number of seconds of inactivity until the Netcon session is downgraded to auditor and finally being closed. (Default: 600)

SNMPPersistentIfIndexes

Make SNMP interface indexes persistent over reboots. Disabling and later re-enabling this setting will trigger a re-numbering of all interfaces in the system. (Default: No)