Properties

Name

Specifies a symbolic name for the pipe. (Identifier)

LimitKbpsTotal

Total bandwidth limit for this pipe in kilobits per second. (Optional)

LimitPPSTotal

Total packet per second limit for this pipe. (Optional)

LimitKbps0

Specifies the bandwidth limit in kbps for precedence 0 (the lowest precedence). (Optional)

LimitPPS0

Specifies the packet per second limit for precedence 0 (the lowest precedence). (Optional)

LimitKbps1

Specifies the bandwidth limit in kbps for precedence 1. (Optional)

LimitPPS1

Specifies the packet per second limit for precedence 1. (Optional)

LimitKbps2

Specifies the bandwidth limit in kbps for precedence 2. (Optional)

LimitPPS2

Specifies the packet per second limit for precedence 2. (Optional)

LimitKbps3

Specifies the bandwidth limit in kbps for precedence 3. (Optional)

LimitPPS3

Specifies the packet per second limit for precedence 3. (Optional)

LimitKbps4

Specifies the bandwidth limit in kbps for precedence 4. (Optional)

LimitPPS4

Specifies the packet per second limit for precedence 4. (Optional)

LimitKbps5

Specifies the bandwidth limit in kbps for precedence 5. (Optional)

LimitPPS5

Specifies the packet per second limit for precedence 5. (Optional)

LimitKbps6

Specifies the bandwidth limit in kbps for precedence 6. (Optional)

LimitPPS6

Specifies the packet per second limit for precedence 6. (Optional)

LimitKbps7

Specifies the bandwidth limit in kbps for precedence 7 (the highest precedence). (Optional)

LimitPPS7

Specifies the packet per second limit for precedence 7 (the highest precedence). (Optional)

UserLimitKbpsTotal

Total bandwidth limit per group in the pipe in kilobits per second. (Optional)

UserLimitPPSTotal

Total throughput limit per group in the pipe in packets per second. (Optional)

UserLimitKbps0

Specifies the bandwidth limit per group in kbps for precedence 0 (the lowest precedence). (Optional)

UserLimitPPS0

Specifies the throughput limit per group in PPS for precedence 0 (the lowest precedence). (Optional)

UserLimitKbps1

Specifies the bandwidth limit per group in kbps for precedence 1. (Optional)

UserLimitPPS1

Specifies the throughput limit per group in PPS for precedence 1. (Optional)

UserLimitKbps2

Specifies the bandwidth limit per group in kbps for precedence 2. (Optional)

UserLimitPPS2

Specifies the throughput limit per group in PPS for precedence 2. (Optional)

UserLimitKbps3

Specifies the bandwidth limit per group in kbps for precedence 3. (Optional)

UserLimitPPS3

Specifies the throughput limit per group in PPS for precedence 3. (Optional)

UserLimitKbps4

Specifies the bandwidth limit per group in kbps for precedence 4. (Optional)

UserLimitPPS4

Specifies the throughput limit per group in PPS for precedence 4. (Optional)

UserLimitKbps5

Specifies the bandwidth limit per group in kbps for precedence 5. (Optional)

UserLimitPPS5

Specifies the throughput limit per group in PPS for precedence 5. (Optional)

UserLimitKbps6

Specifies the bandwidth limit per group in kbps for precedence 6. (Optional)

UserLimitPPS6

Specifies the throughput limit per group in PPS for precedence 6. (Optional)

UserLimitKbps7

Specifies the bandwidth limit per group in kbps for precedence 7 (the highest precedence). (Optional)

UserLimitPPS7

Specifies the throughput limit per group in PPS for precedence 7 (the highest precedence). (Optional)

Grouping

Grouping enables per-port/IP/network static bandwidth limits as well as dynamic balancing between groups. (Default: None)

GroupingNetworkSize

If users are grouped according to source or destination network, the size of the network has to be specified by this setting. (Default: 0)

Dynamic

Enable dynamic balancing of groups. (Default: No)

PrecedenceMin

Specifies the lowest allowed precedence for traffic in this pipe. If a packet with a lower precedence enters, its precedence is raised to this value. (Default: 0)

PrecedenceDefault

Specifies the default precedence for the pipe. If a packet enters this pipe without a set precedence, it gets assigned this value. Should be higher than or equal to the minimum precedence. (Default: 0)

PrecedenceMax

Specifies the highest allowed precedence for traffic in this pipe. If a packet with a higher precedence enters, its precedence is lowered to this value. Should be higher than or equal to the default precedence. (Default: 7)

Attribute

Special Attribute of the current object. (Optional)

Comments

Text describing the current object. (Optional)